✕
  • Home
  • Products
  • About 612
  • Contact
612-logo-s
  • Home
  • Products
  • About 612
  • Contact
biker4-shop-icon1

CHF 0.00

✕
biker4-shop-icon3
biker4-shop-icon2
✕

Login

Lost your password?

  • en_US
    • de_DE

 

News

Welcome to 612!

 

If you have questions or problems, please send an E-Mail.

612_parts

Bike parts, based in 🇨🇭
www.612-Parts.com

Are you Team washers or full mount adaptor? . Why Are you Team washers or full mount adaptor?.Why not both?.It always bothers me, to see washers under the caliper, to adapt from 200 to 203..I get it, they are cheap, available everywhere and do the job..But how about these, shown above?.Shaped like the posts of the adaptor, a little notch to lock in place and align, use the standard bolts and almost invisible..Of course goes best with the shape of Die Bremse calipers!.(Silver washers only for display at the black caliper 😜)#612_parts #bikeparts #cncbikeparts
The good news is: Silver Flat Pedals back in Stock The good news is: Silver Flat Pedals back in Stock!.The bad news is: Black takes just a few more days..A little refinement here and there, like a hard stop for the pins to sit against in the body and here we go..#612_parts #cncbikeparts
Freshly off the Laser! . This is the new version o Freshly off the Laser!.This is the new version of the Podapter..Smaller clamping bolt for a snug fit and flip-flop mounting without compromise..Black bolts..Silver option..What‘s your colorway?.#612_parts #newin #bikeparts #cncbikeparts
Now online! . Surprisingly the demand seems to be Now online!.Surprisingly the demand seems to be higher than I have expected.This has been sitting on my desk way too long it seems..See the quick video for installing: Some grease and a towel come in handy!.#612_parts #bikeparts #cncbikeparts
Already tried @clikvalve ? . When @schwalbe_mtb ho Already tried @clikvalve ?.When @schwalbe_mtb hooked me up with the valves I was sceptical first but gave it a try.Did not take too long and the valves on all bikes got replaced - I really like it!.What I did not like was the pressure build up on all my SV pumpheads to open the valve, including my three @oneupcomponents EDCs..Check the video: It takes quite some force to open the valve every stroke, and it still pushes very little air. No way I am going to fill a flat tire with that on the trail..Replacing the OneUp EDCs not being an option, easiest was to make an adaptor for the crucial parts of the CV pumphead..But I might be the only person who cares..Or am I?#612_parts #bikeparts #cncbikeparts
The wait is almost over! . Now live. . Delivery in The wait is almost over!.Now live..Delivery in early May..#612_parts #cncbrake #cncbikeparts
Finally here, the BSA Bottombracket! . Comes stand Finally here, the BSA Bottombracket!.Comes standard with 71806 angular contact bearings..Easy to service..Ceramic option for Road/Gravel..Accessories and tools will be available for free, to download and 3D print..#612_parts #cncbikeparts #3dprint #mountainbike #newin
Got too much color in your life? . At least on the Got too much color in your life?.At least on the brakes you can go all black now!.This little Bolt-Kit does nothing special except stealthing out the brake levers and give it a neat look..The Kit includes the bolts and seals for 2 brakelevers..#612_parts #bikeparts #cncbikeparts
Been busy testing a new EDC prototype. . What do y Been busy testing a new EDC prototype..What do you think, worth doing a small batch? Comment!.The unique minimalistic design doesn‘t need any Logo or Text..Currently I collect all the plastic wrap to reuse when shipping my products. Thats a messy pile and takes up a lot of space..The bag would make up for that and is actually handy and worth to keep for shopping  etc..And just imagine the insane flex, walking around with that and let everybody know…!🤯.#612_parts #handmade #edc #bikeparts
Part 2/2 showing the features of the new lever . 3 Part 2/2 showing the features of the new lever.3min maximum is super short, but you get the idea..Still super bad at that Media stuff..#612_parts #cncbikeparts #bikeparts #cncbrake #enduromtb #
The angular contact bearings have been a treat! . The angular contact bearings have been a treat!.From mud to dust over the past few months they still run incredibly smooth..Now testing some regular stainless steel ball bearings with 29mm inner diameter to ditch the spindle adaptors..The shell is designed to allow bearing replacement to whatever bearing you prefer; regular, angular or ceramic bearings..#612_parts #cncbikeparts #enduromtb #bikeparts
Here is my take on Flat Pedals. . Massive 114mmx11 Here is my take on Flat Pedals..Massive 114mmx112mm to place your foot on..Outboard 18mm thick, in the middle 16mm..483g.Made in Germany..#612_parts #cncbikeparts #flatpedals #madeingermany
This has been on my To-Do List for way too long no This has been on my To-Do List for way too long now..Fitment and feel are superb.Let‘s see where this is going..#612_parts #cncbikeparts #prototype #bikeparts
Been packing a lot of small stuff lately. . Feels Been packing a lot of small stuff lately..Feels like there is no end to that, but with warmth of the spring sun shining on my back, sitting outside, things gets pretty enjoyable..By the way, Brakepads back in stock!.Already checked yours? 😉.#612_parts #newin #accessories #bikeparts
Since a few weeks I have the pleasure of testing a Since a few weeks I have the pleasure of testing a prototype stem made by @bjorncycles ..I am pretty amazed by this little piece of aluminium so far.Of course this is yet another stem, but at just 86g and fully DH-Certified, this is a wonderful addition to my Palka handlebar.@bjorncycles told me that the finishing, in this case a cerakote, will be refined for better appearance..Had it for a few days in Finale and on my hometrails - zero issues or complaints it simply does it’s job - perfect!.This one is a 31.8mm clamp and 40mm length..#612_parts #bjorncycles #cncbikeparts #mountainbike #enduromtb
That‘s about it with 2024. . Thank you to each and That‘s about it with 2024..Thank you to each and everyone of you, who made this another special year for me..From the highest highs, to the lowest lows..All the new faces I got to meet, all the good Friends still around..Cheers!.#612_parts
Happy Holidays y‘all! . Enjoy a few days off but d Happy Holidays y‘all!.Enjoy a few days off but don‘t forget to get out on your bikes!.Cheers!.#612_parts
New in! . Here are the 2 piston calipers, both Pos New in!.Here are the 2 piston calipers, both Post- and Flatmount..Available in either DOT or Mineraloil..22mm stainless steel pistons..84.7g for the Postmount82.6g for the Flatmount..4 Oil bores for convenient bleeding.Machined in Germany..Check the Website for more info..Like, subscribe, comment, hit the notification bell - do what ever you want, it’s Friday! To the Pub!!.#612_parts #cncbrake #cncbikeparts #madeingermany #madeinswitzerland
What a rad setup! . Back in 2016, when I started m What a rad setup!.Back in 2016, when I started mountainbiking @antidotebikes Lifeline DH was the bike of my dreams..A bit later a guy named Gee Milner got my attention with his @dream_build_bikes videos, building beautiful bikes..I am still a huge fan of both @dream_build_bikes and @antidotebikes and now look what all came together and imagine what that means to me..And all that put on a @porsche in my favorite color..Will it get any better than that? Let’s see what the future has in store!.#612_parts #dreambuild #porsche #enduromtb
Freshly in: +40 and +43 PM-Adaptors in both gray a Freshly in: +40 and +43 PM-Adaptors in both gray and black!.Comes with 4 bolts and alignes with the edges of the caliper to give it a sleek look..Machined and anodized in Germany..Now available, check the Website for more information..#612_parts #cncbikeparts #madeingermany
Follow on Instagram

useful links
  • Contact
  • About 612
  • Shipping & Returns
  • Payment Methods
  • Terms and Conditions
customer account
  • Orders
  • Addresses
  • Account details
  • Reset Password

Follow us
on 612

© 2022 612 Parts | All Rights Reserved | Designed by AMP Studio

  • Datenschutzerklärung
  • Impressum
✕

Login

Lost your password?

✕

Cart

Proceed to checkout View cart
Home
This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy zu.
Read more